54/108Mbps Super A+G
Wireless Access Point
WDAP-2000PE
User’s Manual
Safety
This equipment is designed with the utmost care for the safety of those who install and use it.
However, special attention must be paid to the dangers of electric shock and static electricity
when working with electrical equipment. All guidelines of this and of the computer manufac-
ture must therefore be allowed at all times to ensure the safe use of the equipment.
CE Mark Warning
This is a Class A product. In a domestic environment, this product may cause radio interfer-
ence, in which case the user may be required to take adequate measures.
Revision
User’s Manual for PLANET 54/108Mbps Super A+G Wireless Access Point
Model: WDAP-2000PE
Rev: 1.0 (August, 2005)
Part No. EM-WDAP2000PE
iii
TABLE OF CONTENTS
2.2 Using PoE (Power over Ethernet)................................................................. 7
3.3 Setup Wizard................................................................................................. 10
3.3.2 Device IP Settings................................................................................. 10
3.3.4 Save Config........................................................................................... 13
3.4 Device Status................................................................................................ 14
3.4.3 Bridge Table.......................................................................................... 15
3.4.4 Radio Table........................................................................................... 16
3.4.5 Site Survey Table.................................................................................. 16
3.5.3 SNMP Settings...................................................................................... 19
3.5.5 SSID Settings........................................................................................ 21
3.5.8 RADIUS Settings................................................................................... 25
3.6.3 Factory Default...................................................................................... 30
3.6.4 Reboot System...................................................................................... 30
i
ii
Chapter 1
Introduction
1
PLANET WDAP-2000PE is an IEEE 802.11a+g dual band Wireless Ac-
cess Point with PoE. With the latest innovative Super A/G technology integrated,
the maximum data rate of WDAP-2000PE is 108Mbps, which doubles the speed of
standard 802.11a/g. WDAP-2000PE is also backward compatible and interoperable
with IEEE 802.11b compliant wireless devices.
Emphasizing on the enterprise demand, WDAP-2000PE enhances many security
and management features, including multiple SSIDs, VLAN, QoS, DiffServ support,
WPA/WPA2, DoS Prevention and so on. The LAN port of WDAP-2000PE has PoE
function conforming to IEEE 802.3af, providing both data transfers and power
supply through one Ethernet cable. Therefore, it can be installed anywhere without
the constraint on power socket. Provided with two reversed-polarity SMA male
connector, WDAP-2000PE is easy to connect external antenna and booster to
extend the wireless distance.
1.1 Package Contents
Make sure that you have the following items:
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
WDAP-2000PE
Dipole Antenna x 2
Quick Installation Guide
User’s manual CD-ROM
Power Adapter
If any of the above items are missing or damaged, contact your supplier for
support.
Note:
1.2 Features
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Wireless LAN IEEE802.11a+g and IEEE802.11b compliant
Support PoE port (IEEE802.3af compliant)
Strong network security with 802.1x authentication, and 64/128/152-bit WEP encryption
WPA and WPA2* with PSK/TKIP/AES support
Super A/G mode efficiently raises the data transfer rate up to 108Mbps
Two operation modes selectable for both 5GHz and 2.4GHz radios: AP / WDS mode
Adjustable transmit power and data rate
Watchdog timer, NTP client and basic UPnP support
Provide Web and CLI (Command Line Interface) Configuration
SNMP management support (V1/V2, Traps, MIB2, IF MIB, Ether-like MIB, 802.11-MIB)
Support Multiple SSIDs, 802.1Q VLAN, 802.1p QoS, DiffServ, DoS Prevention, MAC
filtering.
* WPA2 feature will be available in the end of 2005 Q3.
3
1.3 Physical Details
Top View
LED
Status Description
Steady Green – Power on
POWER PWR
OFF – Power off
Steady Green - Link is active
Link/Act Flashing Green - Transmit or receive data
OFF - No connection
LAN
Steady Green - Link is active on 100M speed
100M
Flashing Green - Transmit or receive data
OFF - Link is active on 10M speed
Steady Green - Link is active on 802.11a
mode
5 GHz
Flashing Green - Transmit or receive data
OFF - No connection
WLAN
Steady Green - Link is active on 802.11b/g
mode
2.4GHz
Flashing Green - Transmit or receive data
OFF - No connection
4
|