2
3
6
7
MP3
TRK
MP3
TRK
4
PROG
5
MP3
X
TRK
MP3
ALL
TRK
English
Controls
Congratulations on your purchase and
welcome to Philips!
Back/bottom panel (See 1)
$ MP3 LINK – inlet for external audio source
% AC MAINS~ - inlet for power cord.
.
To fully benefit from the support that
Philips offers, register your product at
^ Voltage selector - adjusts to match the
local voltage: 110-127V or 220-230V.
& Telescopic antenna - improves FM recep-
Supplied Accessories
– AC power cord
tion.
* p - 3.5 mm stereo headphone socket
Helpful hints: The speakers will be muted
when headphones are connected to the set.
Top/front panels (See 1)
1
DBB
–
turns the bass enhancement on/off
( Battery door – Press on the arrow and
push to insert 6 x 1.5V R-14/ UM-2/ C-
cells.
2 TUNING – tunes to radio stations
3 PUSHTO OPEN – opens/closes the CD
door
CAUTION
4
Source selector: CD/USB, FM, MW, OFF
–
–
selects CD, USB or radio (FM/MW) source
switches off the set
– Visible and invisible laser radia-
tion. If the cover is open, do not
look at the beam.
5
6
VOLUME
–
adjusts volume level
– High voltage! Do not open.You
run the risk of getting an electric
shock.The machine does not con-
tain any user-serviceable parts.
– Modification of the product
could result in hazardous radia-
Display shows the CD/USB functions.
–
7 CD/USB – enters disc or USB mode
8 REPEAT
–
repeats a track / CD program /
entire CD.
9 USB port – connects an external USB mass
storage device
starts or pause CD/USB playback
selects the next/previous track
.
tion of EMC or other unsafe oper-
ation.
0
2 ;
–
∞
§
–
– searches forwards/backwards (press
and hold the button) within the cur-
rent track
9
–
–
stops disc/USB playback;
erases a program
! PROG – programs tracks and reviews the
program
@ ALB +/- – For MP3-CD/USB only: select
albums.
#
SHUFFLE – plays all tracks in random order.
Power Supply
General Operation
thunderstorms. Children could seriously injure
themselves as the free end of the cable may
still be live if only the connector is removed
from the MAINS socket at the back of the
unit.
Power Supply
Whenever convenient, use the power supply
cord if you want to conserve battery life.
Make sure you remove the plug from the set
and wall outlet before inserting batteries.
Batteries (not included)
The type plate is located on the bottom
of the set.
1
2
Open the battery door and insert 6 batteries,
type R-14, UM-2 or C-cells, (preferably
Helpful hints:
–
To avoid unnecessary energy consumption,
always adjust the Source selector to OFF
after using the set.
alkaline) with the correct polarity as indicated by
the "+" and "–" symbols inside the compartment.
Close the battery door, making sure the
batteries are firmly and correctly in place.The
set is now ready to operate.
General operation
Batteries contain chemical substances, so
they should be disposed of properly.
Switching on and off and selecting the
function
To select your sound source, adjust the
Source selector to: CD/USB, FM or
MW.
•
•
Incorrect use of batteries can cause electrolyte
leakage and will corrode the compartment or
cause the batteries to burst:
Do not mix battery types: e.g. alkaline with
carbon zinc. Only use batteries of the same type
for the set.
When inserting new batteries, do not try to mix
old batteries with the new ones.
Remove the batteries if the set is not to be used
for a long time.
1
2
3
To switch off the set, adjust the Source
selector to OFF position.
•
•
To switch to MP3 LINK mode, connect an
external audio source to the MP3 LINK
inlet.
Helpful hints:
Using AC power
WARNING:Always check you have
completely switched off the set, before
you change or disconnect power supply.
•
The set switches to MP3 LINK mode
automatically when an external audio source
is connected, no matter the set is in
CD/USB, FM or MW mode.
1
2
Check if the power voltage, as shown on
the type plate located on the bottom
of the set, corresponds to your local power
supply. If it does not, consult your dealer or
service center.
•
The MP3 LINK inlet is not for earphones.
Adjusting volume and sound
Adjust the sound with the VOLUME and
DBB controls.
Connect the power cord to the AC
MAINS~ inlet and the wall socket.The set is
now connected and ready for use.
3
4
To switch the set off completely, withdraw the
power cord from the wall socket.
Install the unit near the AC outlet and where
the AC power plug can be easily reached.
•
Disconnect the power cord from the wall
socket to protect your set during heavy
Tuner
MP3/WMA/CD Player
Radio reception
Playing a disc
1
2
Adjust the Source selector to FM or
MW.
•
•
This CD player plays Audio Discs including
CD-Recordables (CD-R), CD-Rewritables
(CD-RW) and MP3/WMA CD.
Turn TUNING to tune to a station.
CD-ROM, CD-I, CDV,VCD, DVD or
computer CDs are not possible for playback.
To improve radio reception
IMPORTANT!
•
•
For FM, extend, incline and turn the telescopic
antenna for best reception. Reduce its length if
the signal is too strong.
•
CDs encoded with copyright protection
technologies by some record companies may
be unplayable by this product.
For MW, the set uses a built-in antenna. Direct
this antenna for best reception by turning the
whole set.
•
DRM-protected WMA disc is not support.
1
2
Adjust the Source selector to CD/USB.
Press CD/USB once or more to enter the
CD mode.
About MP3
3
Open the CD door, and insert a CD with
the printed side facing up, then press the CD
door gently to close.
The music compression technology MP3
(MPEG1 Audio Layer 3) significantly reduce
the digital data of an audio CD while
maintaining CD quality sound.
➜ Display shows ---, and later the total
number of tracks. (See 2)
•
•
Getting MP3 files: you can either download
legal music files from the internet to your
computer hard disc, or create such files by
converting audio CD files in your computer
through appropriate encoder software.
(128kbps bit rate or higher is recommended
for MP3 files.)
4
5
Press 2; to start playback.
To pause playback, press 2;
Display: 2 flashes. (See 3)
To resume, press 2; again.
To stop playback, press
.
➜
6
7
9.
Creating an MP3 CD: burn the music files
from your computer hard disc on a CDR or
CDRW using your CD burner.
Helpful hints:
CD play will also stop when:
Helpful Hints:
–
–
–
you open the CD door;
you select USB FM MW or OFF
the CD has reached the end.
– Make sure that the file names of the MP3 files
end with .mp3 .
– Total number of music files and albums: around
400 (with a typical file name length of 20
characters)
,
,
;
– The length of file names affects the number of
tracks for playback.With shorter file names, more
files can be burned on a disc.
MP3/WMA/CD Player
Helpful hints :
Selecting a different track
–
When playback of your program comes
to the stop position, your set will return
to normal playback.To re-enter program
mode, press PROG in the stop position.
•
•
Press ∞/ § once or repeatedly until the
desired track number appears in the display.
For MP3/WMA-CD: First press ALB +/-
once or more to select your album.
In the pause/stop position, press 2; to start
playback.
Reviewing the program
In the stop position, press PROG repeatedly
to see your stored tracks.
Finding a passage within a
track
Erasing a program
1
2
During playback, press and hold ∞ or §.
➜ The CD is played at high speed and with
reduced volume.
When you recognize the passage you want,
release ∞ or § to resume normal playback.
You can erase the contents of the memory
by:
– in the stop position, press PROG to enter
program mode, and then press 9.
– selecting USB
,
FM, MW or OFF;
Helpful hints:
– opening the CD door;
–
When your searching reaches the end of the
last track, the CD goes to stop mode.
Programming track
numbers
You may store up to 20 tracks in the desired
sequence. If you like, store any track more
than once.
1
2
In the stop position, press PROG to
activate programming.
➜ Display: PROG and P01 flash. (See 4)
Press
∞
or
§
to select your desired track
number.
For MP3/WMA-CD: first press ALB +/-
once or more to select your album.
3
4
Press PROG to store the desired track
number.
➜ Display: PROG and P02 flash for you
to program the next track.
Repeat steps 2 to 3 to select and store all
desired tracks in this way.
➜ If you attempt to store more than 20
tracks, no track can be selected and the
display shows ---.
5
To play your program, press
2/;.
MP3/WMA/CD Player
USB Connection
Different play modes:
REPEAT and SHUFFLE
(See 5, 6)
You can select and change the various play
modes before or during playback, and
combine REPEAT modes with PROG (PRO-
GRAM).
Using USB connectivity
•
•
AZ1839 is fitted with a USB port in the front
panel, offering a plug and play feature which
allows you to play, from your AZ1839, digital
music and spoken contents stored on a USB
mass storage device.
Using a USB mass storage device, you can
also enjoy all the features offered by AZ1839
which are explained and instructed in the sec-
tions of disc operation.
– plays the current track continuously.
For MP3:
ALB –plays all tracks of current album
repeatedly.
– repeats the entire CD/program.
Compatible USB mass storage devices
With the AZ1839, you can use
– USB flash memory (USB 2.0 or USB 1.1)
– USB flash player (USB 2.0 or USB 1.1)
– plays all tracks in random order.
1
To select play mode, press
REPEAT/SHUFFLE once or more.
➜ The display shows the related icon.
Press 2; to start playback if in the stop/pause
position.
To return to normal playback, press
REPEAT/SHUFFLE repeatedly until the
modes are no longer displayed.
• USB device which requires driver
installation under Windows XP is not
supported.
2
3
Note:
In some USB flash players (or memory devices),
the stored contents are recorded using copyright
protection technology. Such protected contents
will be unplayable on any other devices (such as
AZ1839 device).
Supported formats:
– USB or memory file format FAT12, FAT16,
FAT32 (sector size: 512 - 65,536 bytes)
– MP3 bit rate (data rate): 32-320 kbps and
variable bit rate
– WMA v9 or earlier
– Directory nesting up to a maximum of 8
levels
– Number of albums: maximum 99
– Number of tracks: maximum 511
– ID3 tag v2.0 or later
– File name in Uicode UTF8 (maximum
length: 128 bytes
USB Connection
The system will not play or support
the following:
• Empty albums: an empty album is an album
that does not contain MP3/WMA files, and
will not be shown in the display.
• Non-supported file formats are skipped.
This means that e.g.:Word documents .doc
or MP3 files with extension. dlf are ignored
and will not be played.
• AAC,WAV, PCM. NTFS audio files
• DRM protected WMA files
Helpful hints:
– Up to 511 playable audio files stored on a
USB mass storage device can be played on
AZ1839.
– Up to 99 playable albums stored on a USB
mass storage device can be selected and
displayed on AZ1839.
– Make sure that file names of MP3 files end
with .mp3. and the file names of WMA files
end with .wma.
– For DRM protected WMA files, use Windows
Media Player 10 (or later) for conversion.Visit
Media Player and WM DRM (Windows Media
Digital Rights Management).
• WMA files in Lossless format
Playing a USB mass storage device
Make sure that your AZ1839 is being pow-
ered by AC mains or specified batteries.
1
– For USB device playing, if the display shows
"OL", it means that the USB device is electrically
overloading AZ1839.You need to change a
USB device.
2
3
Adjust the source selector to CD/USB.
Press CD/USB once or more to enter the
USB mode.
➜ Display shows - - - .
4
Plug a compatible USB mass storage device
to AZ1839’s USB port marked
. If
needed, use a suitable USB cable to connect
between the device and AZ1839’s USB
port.
➜ The device will automatically power on.
If the device is not powered on, turn on the
power manually, then re-connnect it.
➜ AZ1839’s display shows - - - and then the
total number of playable audio files (Max.
displayed track number is 511) stored on
the device.
•
5
Press 2; on your AZ1839 to start play.
➜ AZ1839’s display will show the current
track number.
INFORMATION REGARDING USB DIRECT:
1. Compatibility of the USB connection on this product:
a) This product supports most USB Mass storage devices (MSD) that these devices are compliant to the
USB MSD standards.
i) Most common Mass storage class devices are flash drives, memory sticks, jump drives and etc.
ii) If you see a "Disc Drive" showing up on your computer after you have plugged the mass storage
device into your computer, most likely it is MSD compliant and it will work with this product.
b) If your Mass storage device requires a battery/power source, please make sure you have a fresh bat-
tery in it or charge the USB device first and then plug it into this product again.
2. Supported Music type:
a) This device only supports unprotected music with file extension: .mp3 .wma
b) Music bought from on-line music stores are not supported because they are secured by Digital Rights
Management protection (DRM).
c) File name extensions that ended with the following are not supported: .wav; .m4a; .m4p; .mp4; .aac
and etc.
3. No Direct connection can be made from a Computer USB port to this product even you have either or both
mp3 or wma file in your computer.
Environmental information
All unnecessary packaging material has been omitted.The packaging can be easily separated
into three materials: cardboard, polystyrene and plastic.
Your set consists of materials which can be recycled if disassembled by a
specialized company. Please observe the local regulations regarding the
disposal of packaging, dead batteries and old equipment.
Maintenance & Safety (See 7)
CD player and CD handling
Safety information
•
If the CD player cannot read CDs correctly,
use a cleaning CD to clean the lens before
taking the set to repair.
•
•
Place the set on a flat, hard and stable surface
so that the system does not tilt.
Where the MAINS plug or an appliance cou-
pler is used as the disconnect device, the dis-
connect device shall remain readily operable.
•
•
The lens of the CD player should never be
touched!
Sudden changes in the surrounding
•
Do not expose the set, batteries, CDs to
humidity, rain, sand or excessive heat caused
by heating equipment or direct sunlight.
temperature can cause condensation on the
lens of your CD player. Playing a CD is then
not possible. Do not attempt to clean the
lens but leave the set in a warm environment
until the moisture evaporates.
•
•
The apparatus shall not be exposed to drip-
ping or splashing.
Adequate ventilation with a minimum gap of
15cm (6 inches) between the ventilation
holes and surrounding surfaces is necessary
to prevent heat build-up.
•
•
Always close the CD door to avoid dust on
the lens.
To clean the CD, wipe in a straight line from
the center towards the edge using a soft,
lint-free cloth. Do not use cleaning agents as
they may damage the disc.
•
Do not cover the ventilation openings with
items such as newspapers, table-cloths, cur-
tains, etc.
•
Never write on a CD or attach any stickers to it.
•
•
•
No objects filled with liquids, such as vases,
shall be placed on the apparatus.
No naked flame sources, such as lighted can-
dles, should be placed on the apparatus.
The mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
•
•
To clean the set, use a dry cloth. Do not use
any cleaning agents containing alcohol, ammo-
nia, benzene or abrasives as these may harm
the housing.
Battery shall not be exposed to excessive
heat such as sunshine, fire or the like.
Troubleshooting
If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.
WARNING:
Do not open the set as there is a risk of electric shock. Under no
circumstances should you try to repair the set yourself, as this will
invalidate the guarantee.
Problem
Note:
Make sure the CD is not encoded with copy-
right protection technologies, as some do not
conform to the Compact Disc standard.
– Possible cause
• Remedy
No sound /power
The CD skips tracks
– Volume not adjusted
– CD damaged or dirty
• Adjust theVOLUME
• Replace or clean CD
– Power cord not securely connected
• Connect the AC power cord properly
– Batteries dead/ incorrectly inserted
• Insert (fresh) batteries correctly
– CD contains non-audio files
– Program/shuffle is active
• Quit program/shuffle mode
Note: A CD badly scratch or dirty may result in
improper operation.
• Press ∞ , § once or more to skip to a CD audio
track, instead of the data file.
Sound skips during MP3 playback
–
MP3 file made at compression level exceeding
320kbps
Display does not function properly / No reac-
tion to operation of any of the controls
• Use a lower compression level to record CD
tracks into MP3 format
– Electrostatic discharge
– Disc damaged or dirty
• Replace or clean disc
• Switch off and unplug the set. Reconnect after a
few seconds
The USB device doesn’t play on my
AZ1839
---, Er or no indication
– It is not set in the USB mode.
– No CD inserted
•
Select the USB mode.
•
Insert a CD
– CD badly scratched or dirty
Replace/ clean CD, see Maintenance
– The device is not securely connected to AZ1839’s
USB port.
• Re-connect the device, and make sure that the
device is powered on.
– The device is not supported by AZ1839, or the audio
file format stored on the device is not supported by
AZ1839.
• Use a compatible device/ playable audio file
format.
•
– Laser lens steamed up
• Wait until lens has cleared
– CD-R/CD-RW is blank or not finalized
•
Use a finalized CD-R/CD-RW or suitable CD
Audio disc only
Hearing Safety
Listen at a moderate volume:
●
Using headphones at a high volume can impair your hearing. This product can produce sounds in
decibel ranges that may cause hearing loss for a normal person, even for exposure less than a
minute. The higher decibel ranges are offered for those that may have already experienced some
hearing loss.
●
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of
sound. So after prolonged listening, what sounds “normal” can actually be loud and harmful to
your hearing. To guard against this, set your volume to a safe level before your hearing adapts and
leave it there.
To establish a safe volume level:
●
●
Set your volume control at a low setting.
Slowly increase the sound until you can hear it comfortably and clearly, without distortion.
Listen for reasonable periods of time:
●
●
Prolonged exposure to sound, even at normally “safe” levels, can also cause hearing loss.
Be sure to use your equipment reasonably and take appropriate breaks.
Be sure to observe the following guidelines when using your headphones:
Listen at reasonable volumes for reasonable periods of time.
●
●
●
●
●
Be careful not to adjust the volume as your hearing adapts.
Do not turn up the volume so high that you can't hear what's around you.
You should use caution or temporarily discontinue use in potentially hazardous situations.
Do not use headphones while operating a motorized vehicle, cycling, skateboarding, etc.; it may
create a traffic hazard and is illegal in many areas.
Specifications
Power Consumption............15W
Dimensions (L x W x H)......420 x 240 x 168 (mm)
Weight.................................. 2.828 kg
Problemas y soluciones
Si ocurre una avería, siga los consejos que se dan más abajo antes de llevar el aparato a reparar.
Si,después de haber seguido estos consejos, no logra solucionar el problema, consulte a su distribuidor
o centro de servicio.
PRECAUCIÓN: No abra el aparato ya que puede recibir una descarga
eléctrica. No trate de reparar el aparato Ud. mismo ya
que tal acción invalidaría la garantía.
Problema
El CD salta de pista
– El CD está dañado o sucio
• Cambie o limpie el CD.
– Causa posible
•
Solución
–
•
La función Programme/SHUFFLE está activada
Desactive la función programme/SHUFFLE
No hay sonido/energía
– VOLUME no está ajustado
• AjusteVOLUME
– El cable de red no está bien conectado
• Conéctelo bien
– Pilas gastadas/insertadas incorrectamente
• Inserte las pilas (nuevas) correctamente
Nota: Un CD, muy arañado o sucio puede
provocar un funcionamiento incorrecto.
El sonido salta durante la reproducción de
MP3
– El fichero MP3 fue creado a un nivel de
compresión superior a 320 kbps
–
El CD contiene archivos no musicales
• Introduzca un disco apropiado o pulse ∞ o §
• Utilice un nivel de compresión inferior para
grabar pistas de CD en un formato MP3
una o más veces para saltar a una pista musical
del CD, en vez de un archivo con información
.
– El CD está dañado o sucio
• Cambie o limpie el CD
EI display no funciona correctamente/ No
reacciona a la actuación de ninguno de los
controles
El dispositivo USB no se reproduce en el
AZ1839
– Descarga electrostática
• Apague y desenchufe el aparato.Vuelva conectarlo
después de unos segundos
– No se ha establecido el modo USB.
•
Seleccione el modo USB.
– El dispositivo no se ha conectado correctamente al
puerto USB del AZ1839.
Indicación ---, Er
o
no
• Vuelva a conectar el dispositivo y asegúrese de
que está encendido.
– No hay un CD colocado
• coloque uno
– El dispositivo no es compatible con el AZ1839 o el
formato de audio almacenado en el dispositivo no es
compatible con el AZ1839.
• Utilice un dispositivo o formato de audio repro-
ducible compatible.
– El CD está rayado o sucio
Cambie/ limpie el CD, vea Mantenimiento
– La lente láser tiene humedad
• Espere hasta que la humedad se evapore
– CD-Grabable / CD-Regrabable es virgen o no ha sido
finalizado
•
• Utilice sólo un CD-Grabable/ CD-Regrabable
Notas:
Asegúrese de que el CD no está codificado
con tecnologías de protección de los derechos
de autor, ya que algunos no cumplen el están-
dar de disco compacto.
|